Cordex UT5000 Atex Ultrasonic Tester

The UT5000 Intrinsically Safe Ultrasonic Tester with CorDEX CONNECTTM measures metal thickness for Non-Destructive Testing (NDT) and Predictive Maintenance (Pdm) on pipelines and fixed equipment within hazardous locations

The CorDEX UT5000 is a next-generation tester packed with proven technologies: CorDEX CONNECT uses RFID + Software to tag measurements with their location then organizes the data, giving the engineer a view of the pipeline at any specific location; the unique corrosion mode option helps identify spots of thinning; Multi ECHOTM technology improves accuracy on uneven surfaces; onboard memory stores up to 1000 readings.

Designed for rugged environments, the overmoulded body protects a 3.1 inch colour screen and has easy-to-feel raised buttons. The dual-element, 4MHz transducer is adjustable up to 10Hz with accuracy of +/- 0.05mm.

• CorDEX CONNECT TM
• Stores up to 1000 measurements
• Full colour, backlit screen
• Tested for Zone 1 IIC T4 hazardous areas

Cordex UT5000 Specifications
Certification	Tested for Zone 1 IIC T4 hazardous areas No hot work permit necessary
Memory	Stores up to 1000 measurements
Screen	3.1” RGB TFT colour screen with backlight Right/left handed set up
Material Velocity Selection	Preloaded via Drop-Down menu, or user defined.
Transducer	Dual Element
Pulse Rate	Standard transmit pulse rate of 4Hz Adjustable from single shot up to 10Hz
Receiver Bandwidths	1MHz to 15MHz (-3dB points)
Frequency	4MHz, 3mm up to 100mm
Accuracy	+/- 0.05mm
RFID Tag Reader	• Operates with 13.54MHz passive tags • Detection range up to 5cm • Supports ISO/IEC 15693-2, ISO/IEC 18000-3 tag formatsn
Battery Details	• Rechargeable lithium thionyl chloride primary 3.6V cell • 100 hours continuous operation with back light restrictions low battery warning
Operating Temperature	-10 to +50C