Redapt BD-U Breather Drain
Redapt BD-U Series of Flameproof Breather Drains has a primary function of effectively draining any water present within the enclosure, whilst allowing air in the enclosure to breath with the surrounding atmosphere, minimizing moisture build up within the enclosure.
Intended for use where an installation is subject to fluctuations in temperature which can lead to the formation of condensation and a subsequent moisture build-up.
This Breather Drain allows air within an enclosure to breathe with the surrounding atmosphere helping to prevent condensation and any potential damage to sensitive electric/electronic equipment housed within.
The Breather Drain will also maintain the IP66 rating of any enclosure to which it is installed.
Approved to the latest international standards, Flameproof
Breather Drains can be supplied with ATEX (CENELEC) and IECEx hazardous
area certificates.
| Protection Method | Exd Flameproof & Exe Increased Safety |
|---|---|
| Ingress Protection Rating | IP66 |
| Impact Resistance | 20Nm |
| Ambient Temperature Range | -50°C to 230°C (dependent on O-Ring selection) |
| Threadforms | ISO Metric to BS 2874, NPT to ANSI.ASME B1.20.1 |
| Materials | Brass CZ121M to BS 2874, Stainless Steel 316 to BS 970 |
| Plating | Electroless Nickel and Zinc |
| O-Ring Materials | Silicone – others available on request |
| Standards Approved To | IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0, IEC/EN 61241-1 |
| ATEX Approvals | SIRA08ATEX1240X |
| IECEx Approval | IECEx SIR 08.0096X |